自動點膠機膠體粘度對產品的影響！
自動點膠機膠體以及流體在滾動過程中，其相鄰的流體層間也相應存在著相應活動。而這兩層流體之間所發生的沖突阻力就被稱之為膠體粘度。
In the rolling process of the colloid and fluid of the automatic dispensing machine, there are corresponding activities between the adjacent fluid layers. The friction between the two layers of fluid is called colloidal viscosity.
自動點膠機膠體粘度對產品的影響：
The influence of colloid viscosity of automatic dispenser on products:
膠體粘度對封裝精準度、封裝粘結度以及封裝總體品質都起著關要緊的用處，所以膠體粘度是自動點膠機在封裝過程中越發需求調控的要緊參數值。
Colloidal viscosity plays an important role in the accuracy, adhesion and overall quality of packaging. Therefore, colloidal viscosity is an important parameter for automatic dispenser in the packaging process.
在利用自動點膠機封裝設置實行封裝過程中，找到每個對膠體的粘度實行操縱的有用步驟，向來是流體操縱設置廠家以及全部行業孜孜以求的要緊課題，接下來自動點膠機廠家為大家介紹一下膠體粘度異常的解決方法。
In the process of using the automatic dispenser to set up the package and implement the package, it has always been an important task for the manufacturers of fluid control and setting and all industries to find out the useful steps to control the viscosity of the colloid. Next, the manufacturers of automatic dispenser will introduce solutions to the abnormal viscosity of the colloid.
自動點膠機膠體粘度異常的解決方法膠體粘度更常利用的一類步驟是裝配加熱器，這是全部方法中更為常見更快的方法之一。
One of the most commonly used steps is to assemble the heater, which is one of the most common and fastest methods.
在一些特定的封裝境遇以及封裝條件下，需經過抬高境遇、膠體溫度來配合封裝過程。由于抬高膠體的溫度在一定的大限制下，降低脈沖所導致的溫度轉變，流體的一致性得以獲得保證。
In some specific packaging situations and conditions, it is necessary to raise the environment and gel temperature to match the packaging process. The consistency of the fluid is guaranteed because the temperature of the raised colloid is limited to a certain extent and the temperature change caused by the decreased pulse is reduced.
其它一些需求經過下降膠體粘度來全部封裝，對膠體粘度的操縱以及調解也是大水準減削自動點膠機在封裝過程中經常會出現的拉絲拖尾的頻率，流體在自動點膠機、灌膠機封裝過程中的點膠界線、點滴速率以及粘度巨細都對全部封裝產品品質感化長遠，對膠體的操縱工藝、技巧有待進一步增強。
Some other requirements are all packaged by reducing the viscosity of the gel. The manipulation and adjustment of the viscosity of the gel is also a big level to reduce the frequency of drawing tail that often occurs in the packaging process of the automatic dispenser. The dispensing boundary line, dropping rate and viscosity of the fluid in the packaging process of the automatic dispenser and the filling machine affect the quality of all packaged products for a long time, and the colloid The operation technology and skills need to be further enhanced.
上一篇：自動灌膠機設備出現漏氣現象怎么辦？
下一篇：全自動打膠機的效果！
